Artec 2 Channel Direct Box and Splitter

C$59.99

SE-DI2 has two individual channels of active direct interface. This pedal can work with a 9V battery or 48V phantom power from a linked amp or console. Link switch can select individual 2ch mode or two balanced output link modes. E

Availability: In Stock

Brand: Artec

Product Code: SE-DI2

Tags: Artec direct box splitter

SE-DI2 has two individual channels of active direct interface. This pedal can work with 9V battery or 48V phantom power from linked amp or console. Link switch can select individual 2 ch mode or two balanced output link mode. Each channel has gain attenuation switch. Ground LIFT switch can isolate the ground level between amps or console. but phantom power not applied on ground lift mode.

■■ SPECIFICATION ■■
Power supply: DC9V or 48V phantom power
Consumption: 1.5mA
Dimension: 75.5(w) x 115.5(h) x 47.5(d) (mm)
Weight: 260g (include battery)

Technical
Pedal Type	Active Direct box with splitter
Power Source	9 Volt DC tip negative or 49v phantom power (not included)
Current Draw	1.5 mA
Inputs	2 1x1/4"
Outputs	2 XLR
Height	45 mm
Depth	115 mm
Width	77 mm
Weight	260 grams